98 LCD temperature control cabinets shipped to a breeder duck farm in Jiangsu
A breeder duck farm in Jiangsu ordered 98 livestock temperature control cabinets with LCD display and high/low temperature plus power-failure alarms. Every unit was power-tested before dispatch; the equipment watches the house instead of relying on frequent manual rounds.
98 cabinets, one shipment to Jiangsu
An order from a breeder duck farm in Jiangsu: 98 livestock temperature control cabinets with LCD display, high and low temperature alarms and power-failure alarm. Each unit was power-tested, labelled and packed before leaving the plant. The line of cabinets down the corridor is the final count before dispatch — enclosure, panel and accessories, checked one by one.

Final check before dispatch: stainless enclosure, button panel, LCD and terminals, unit by unit.
What is on these cabinets
- LCD display: current temperature, setpoint and running status read straight off the front, without opening the door.
- High and low temperature alarms: a deviation from the set band is flagged at once.
- Power-failure alarm: a supply failure raises an alarm immediately — the one thing duck houses fear most at night, when fans stop and nobody knows.
- Multi-channel output: fans, heating and lighting on separate groups, with local button control.
- Stainless steel enclosure: resistant to damp and to washing down, so the routine clean-out of a duck house needs no extra protection.

Layout: LCD at the top, a row of buttons below, terminals behind the cover.
Why a breeder duck farm chooses this
Breeder ducks run on a long cycle. Brooding, growing and laying each ask for a different temperature, and a house that swings hot and cold changes both the flock and the laying rate. Duck houses are humid, and in winter the warmth and in summer the cooling both depend on equipment and fans. When a person walks the house every few hours, the interval itself is the risk.
The logic here is simple: move from "someone looks every few hours" to "the equipment is always looking". Over-temperature, under-temperature and power loss are known to the cabinet and to the phone at the same time. People go back to judging and acting rather than walking back and forth to a thermometer.
Before it leaves the plant
| Item | Detail |
|---|---|
| Customer | Breeder duck farm, Jiangsu, China |
| Product | Livestock temperature control cabinet with LCD, high/low temperature and power-failure alarms |
| Quantity | 98 units |
| Functions | Temperature display and setting · high/low temperature alarm · power-failure alarm · multi-channel output · local button control |
| Enclosure | Stainless steel |
| Factory test | Power test on every unit, alarm test, terminal and wire-number check |
| Delivery | Crated and shipped, wired and powered on site |
On site
The cabinets are wired to the drawing on arrival. Parameter setting can be supported remotely: we give a suggested band for brooding, growing and laying, and the farm electrician can set them in one pass. On a batch order, the wiring diagram, terminal numbers and cabinet serials match one to one, so no unit ends up in the wrong house.
For temperature control upgrades and batch cabinet orders for duck, goose, chicken and pig houses, call +86 199 3789 6911 (WeChat on the same number) with your house count, fan count and motor ratings.