Smart 4G temperature controller: phone-based zoned control cabinet for farm fans
Baomingxiang 4G zoned temperature cabinet: the whole site on a phone, four temperature probes to show whether a house is even, nine devices with custom names, voice-call and SMS alarms for over-temperature and power failure, a touchscreen on the door and four Auto/Off/Manual selectors for local control.
| Connectivity | 4G, zoned view on phone |
|---|---|
| Display | Touchscreen on the door |
| Temperature | 4 probes |
| Devices | 9 channels, renameable |
| Alarms | Voice call + SMS |
What sets this cabinet apart is not the enclosure but the word "zoning". A farm with several houses and a few fans in each is usually run with one meter per house and someone walking between them. This one puts the houses on a single cabinet, so the whole site fits on one phone screen: which house is online, what each of the four temperatures reads, and what the nine devices are doing.
Four temperatures: is the house even?
The app home screen shows four readings — 28.1, 28.3, 28.4, 28.3 °C. The spread is only a degree or two, and that is the point: probes at different positions (inlet end, middle, doorway, fan side) show whether the house is uniform. A single-probe meter measures the spot where the probe hangs, not the house.
Nine devices, each with its own name
The device list in the app does not have to read "Device 7" or "Device 8" — names can be changed to whatever the farm calls things, such as "West 1" or "East 3". After that, the phone shows which house and which fan, so an alarm call does not start with someone decoding a channel number.
Alarms by phone call and SMS, not just a notification
The app's basic information shows remaining voice credits (99) and SMS credits (98) — alarms go out as voice calls and text messages, not merely as an in-app banner that gets swiped away. Over-temperature, low temperature, power failure or a device dropping offline, and the call reaches the person responsible.
On the cabinet: screen and selectors
The door carries a touchscreen showing the zone layout, and below it four run lights with four Auto / Off / Manual selectors. When the phone is not at hand or the network is poor, anyone standing at the cabinet can still start and stop equipment. Remote access is the convenience; manual is the floor.
Enclosure and installation
Sheet-steel enclosure, white finish, wall mounted, with cable entries top and bottom. The 4G link means no network cable has to be run on site: wherever the house gets a mobile signal, the cabinet can go. Fit the SIM, bind the device number, and the house appears on the phone.
Which farms it suits
How many houses, how many devices per house, and whether each house needs its own temperature zone — those numbers settle the configuration. Larger sites, or sites that must work alongside existing cabinets, can also replace only the control section. Send the house type and fan counts and we will start with a proposal: +86 199 3789 6911.
Popular products
BMX-2070G
Livestock temperature control cabinets
BMX-2070G stainless cabinet: app-controlled livestock thermostat
BMX-2070G stainless-steel cabinet: 7-inch touchscreen, 16 equipment outputs plus 4 VFD channels, 4G SIM for app control, temperature, humidity, gas and negative pressure on one screen. Pre-wired at the factory, ready to run on site. For pig, poultry and duck houses and greenhouses.
Livestock temperature control cabinets
Smart 4G temperature controller: phone-based zoned control cabinet for farm fans
Baomingxiang 4G zoned temperature cabinet: the whole site on a phone, four temperature probes to show whether a house is even, nine devices with custom names, voice-call and SMS alarms for over-temperature and power failure, a touchscreen on the door and four Auto/Off/Manual selectors for local control.
Livestock temperature control cabinets
Temperature controller with power-failure and high/low alarms, 0-10V analogue output, automatic timed control
Baomingxiang BMX-1910B environment control cabinet: beacon and siren alarms for power failure and high/low temperature, 0-10V analogue output for VFDs, switchable temperature or timer control, Beijing-time lighting schedule, four Auto/Off/Manual channels for fans, cooling pads, heating and lighting in a single house.
BMX-2070G
Environmental controllers
BMX-2070G 4G environment controller with 7-inch touchscreen: 16 outputs, 4 VFD channels
Baomingxiang BMX-2070G environment controller: 7-inch touchscreen, 16 relay outputs plus 4 VFD channels, 4G remote access from a phone, positive and negative pressure ventilation with variable speed, over-temperature and power-failure alarms.